The Lif3 Smartchip is a simple, affordable and practical solution that reduces your mobile phone radiation exposure. This wafer thin (0.35mm) adhesive Smartchip includes layers of specially engineered microwave-absorbing materials and a passive directional radio frequency coupler which work together to direct radiation away from your face and body. Simply stick it on to the back of your device and replace your cover without even knowing it’s there.
This particular design is proven to minimise your exposure to mobile phone radiation (SAR) by up to 94%* with virtually no impact on your signal.
Read more about this technology, our FAQs and accredited SAR testing.
Fitting your Smartchip
Lif3 Smartchips are designed to suit specific models of phones. Ensure you have purchased the correct model Lif3 Smartchip for your phone. Please read these instructions carefully before applying your Lif3 Smartchip as correct placement of the Lif3 Smartchip is essential.
Before you begin you must ensure the back of your phone is clean and free of any dirt, dust, lint or oils from your hand. Failure to properly clean the back of your phone may mean the Lif3 Smartchip does not properly adhere.
1. Clean back of phone
with a non-abrasive cleaner
2. Slowly peel backing
paper off the Lif3 Smartchip
3. Gently adhere the Lif3
Smartchip in the correct placement
IMPORTANT: Your Lif3 Smartchip must not be exposed to extreme heat or moisture, both of these can cause serious damage to the Smartchip.
Some Important Points
– The Lif3 Smartchip is designed to be applied only once. Once fitted, it should not be removed as this can damage the internal structure.
– The Lif3 Smartchip should not be tampered with in any way or cut down to a smaller size. The internal structure inside the Lif3 Smartchip has been engineered to strict standards. Correct placement of the Lif3 Smartchip is essential for optimum performance.
– The Lif3 Smartchip is slim enough to fit inside most mobile phone cases however it should not be used with aluminium cases or cases made wholly or partly from any metal as this may affect the performance of the product.
* Refer to test results page for individual results according to phone model and frequency band. Available in seven versions for mobile phones, one for iPhone 5, 5S & SE one for iPhone 6, 6S, one for iPhone 6+, 6S+ one for Samsung Galaxy S6/S6 edge, one for Samsung Galaxy S7, one for Samsung Galaxy S7 Edge & one for most other Android & Windows Smartphones (eg: Samsung, HTC, Nokia, Sony, LG, Motorola & Blackberry).
** Not suitable for use if the mobile phone is placed inside a protective case (or is used with other accessories) which are made of aluminium or any other type of metal as this may affect the performance of the product.